Knowing a few construction techniques is not enough for successful artificial turf laying. There are many types of artificial turf and they are used for different occasions, so naturally there are different ways of laying artificial turf. So naturally there are different ways of laying artificial turf. To be clear about the knowledge of artificial turf It is only then that the construction of artificial turf can be carried out correctly and effectively.
When laying artificial turf, not only focus on the artificial turf itself, but also familiar with the whole construction process of the composition of the structure. For example, the foundation, the base cloth and more need to use the artificial turf construction tools and so on. These are all belong to the part we need to pay attention to. Can not be ignored at will.
In the artificial turf laying before, first of all to keep the site clean, the site on the ground to hinder the construction of debris in a timely manner to move away. Before the construction also determine the environment and weather, to be constructed at room temperature so as not to affect the quality of the glue. Avoid construction in the rainy day, in the rainy day construction is difficult to carry out.
Artificial turf to the field, do not rush to cut. Spread out all the lawn at least 24 hours. The stress generated in the production and transport of artificial turf is completely released, and the lawn is adapted to the thermal expansion and contraction of the new environment, so as not to pave the seams too large.
When cutting artificial turf, do not pursue one cut. It is better to cut slightly larger, and then a little bit of right edge and trimming, so as not to avoid excessive seams in case of cutting small. Slow work makes fine work. When cutting artificial turf, turn the lawn up and cut from the back will be easier.
Because the artificial turf production is divided into each piece for production, so when the artificial turf laying to carry out the joints of the bonding, which requires good skills. When painting with a brush, pay attention to the uniformity of the paint, not uneven thickness. Check the glue after applying it and then dry it.
After bonding, the strength of the joint between the two pieces of lawn is still not enough, but also for pressure curing. At this time the operator needs to clean off the surface of the debris and then rubber hammer in the bonding place for pounding, so that the bond is strong. General curing time in about three days, but in ten days after the routine inspection.
In fact, the filling of quartz sand is also a top priority in the laying of artificial turf, this time quartz sand in the construction of artificial lawn is used to cure the main role of the grass, so as to avoid the collapse of the grass, so that a little bit and the role of rubber particles are a little different. In the filling of quartz sand is mainly to be uniform as far as possible do not let the quartz sand exposed in the air.
This is the artificial turf laying in the attention of the place, of course, applies to most of the artificial turf laying, the use of good use of these methods can be faster to build a quality assurance of artificial turf.
Mobile Phone:
Wechart:
Contact Now